Ordering the creation of a jewel made with passion and craftsmanship for a traditional occasion you do that at a recognized jeweller in the International Antwerp Diamond District
Entourage ring aquamarine and brilliant cut diamonds V-bands.
White rhodium finish Gold 18kt (8 to 12% Palladium) (Also available in other precious metals.) RG0757/5AQ
- 54.5 mmc
- 7.50 g
- Polish R
- Diamond quantity:
- Diamond weight:
- Diamond Shape:
- Round Brilliant
- VS1 - Very Slightly Included 1
- G - Near Colourless/ Rare White
- Very Good
- Very Good
- Very Good
- Natural diamond
- Gems quantity:
- Colored stone weight:
- Setting Details:
- 4-prong setting
- Shape Main Stone:
- Hand made in our workshop
- Choose & buy:
- Ordering the creation of
- Buy what:
- A jewel made with passion and craftsmanship
- For a traditional occasion
- At Whom:
- You do that at
- A recognized
- In the International Antwerp Diamond District
The modern brilliant cut diamond is without a shadow of a doubt the most popular shape available. It consists of 58 facets and the shape is optimized to reflected the light entering the stone through the top (table). The cut surfaced in the mid 17th century and counted only 17 facets in the crown. Later, a Venetian cutter called Vincent Peruzzi, improved the shape to 33 facets in the crown.
VS1 - Very Slightly Included 1
VS1 diamonds contain minor internal characteristics/inclusions which are difficult to observe when examined under 10x magnification.
G - Near Colourless/ Rare White
Only when these diamonds are held next to a master stone of higher color grade, can a slight color be detected. Otherwise color is nealry indiscernible. Although these diamonds are still rare, they are slightly less expensive and are considered a good value. In Scan. D.N. G diamonds are called Top Wesselton and has a value of 1,5-1,99 on the electronic caloriemeter.
Tablesize between 52 and 53% or between 63 and 66%, Crown height between 11 and 11.5% or between 16.5 and 18%, Pavilion depth between 41.5 and 42.5% or 45%
at 10x magnification, minor features are seen
Because of the traditional and romantic meaning it has as a symbol of love and connection we only sell natural diamonds. They have a higher value and are exclusive because natural diamonds are formed in the earth under unique conditions and are very rare, which increases their exclusivity and value. Natural diamond forms deep inside the earth as a result of tectonic pressures 100s of kilometers below the earth's surface. They, as a consequence of their growth environment, are varied and unique. Despite being more pure than other natural crystals, they contain many different impurities incorporated from the environment during the long, slow growth process. Natural diamonds also often have a unique and unpredictable brilliance and color. Diamond producers we are working with also do everything they can to mine and process their diamonds in a responsible and ethical manner.
An entourage or halo setting is a jewelers technique in which a central gemstone is surrounded by smaller stones. They light up the whole and accentuate the central stone. That is why they are sometimes called accent stones. This setting is usually used in rings, earrings and pendants, where the central stone is usually the largest and the smaller stones around it are set in the shape of the central gemstone. This can be circular, oval, square, rectangular or any fantasy shape. The gemstones can be of the same kind or can have different colors or origins depending on the taste of the customer and the availability of the gemstones. An entourage setting is often chosen for engagement rings and wedding rings, because it gives an extra dimension to the center diamond or gemstone. It creates a beautiful sparkle and an impressive look to the ring or pendant, making it look even more impressive.
A four-prong setting is a popular technique that uses four prongs or claws to hold the gem in place. A 4-prong setting can be a classic, cathedral, contour, knife, border or trellis setting. The advantage of a 4-claw setting is that it holds the gemstone securely while still allowing maximum light to shine through. Provided that the prongs are thick enough of course. Another advantage is that the setting is relatively simple and therefore appears a bit more minimalist than the settings with six or eight prongs. When choosing a setting method for a jewel, it is important to consider factors such as the size and shape of the gemstone, the style of the jewel, and the jewel's intended use.
The emerald cut, also referred to as step cut or table cut, is a basic/fundamental cut (like the brilliant cut). Unlike the facets in the brilliant cut, the facets of the emerald are cut in steps: stripe-like facets, which run parallel to the girdle. The corners are truncated, this is done to protect the stone. Sharp edges and points are vurnerable and risk getting chipped. The emerald cut is often used in colored stones because light is better reflected and color is intensified.
Hand made in our workshop
A jewel in precious metal forged and processed by hand is a unique work of art. No serial work, but a creation with a soul. So choose a jewel made by hand by a workshop in the middle of the Antwerp diamond district and by a goldsmith with years of experience. This way you can obtain the perfect jewel that suits you exactly. And a natural diamond makes it timeless because Diamonds are forever!
This item exudes class and simplicity.
Ordering the creation of
If you've decided to have your own creation, to have your own piece of jewelry made especially for you or a loved one, then it's time to visit us. We are happy to help you.
A jewel made with passion and craftsmanship
All our jewelery is produced under our supervison in the center of the Antwerp diamond district. Goldsmiths use all their skills to create something unique for you.
For a traditional occasion
For a special occasion, choose a traditional jeweler.
You do that at
Choosing a piece of jewelry as a gift or as a promise of lifelong commitment and love is not something you should take lightly. Inform yourself well in advance and colaborate with someone with experience and expertise.
For more than three decades, our workshop has been recognized by the most important authorities in the diamond sector. You can find us for many years on the website www.registereddiamondcompanies.be of AWDC, the umbrella organization of the Antwerp diamond sector. We are also officially recognized as goldsmiths and craftsmen and registered in the Guarantee Register of the Federal Public Service Economy and SMEs.
As a jeweler, Peter Poussenier specializes in diamonds of the highest quality and in the manufacture of bespoke jewelry set with diamonds and precious stones. You can contact us for a finished jewel from our collection or you can first look with us for a diamond around which we create your jewel.
In the International Antwerp Diamond District
If you would like to visit our workshop instead of buying your jewel online, we would like to welcome you in our workshop in Antwerp. Antwerp the diamond city par excellence! The sinjorenstad of Rubens with its world port, fashion mecca and international arts center will undoubtedly delight and inspire you for a long time to come.